|
|
|
C-1HDLR
INFO REQUEST
For planning concrete. Heavy duty design. Double angle carbide tip (12.7mm diameter) provides long tool life.
|
C-1HDSR
INFO REQUEST
For planing concrete. Heavy duty design. Double dome carbide tip (12.7mm diameter) provides long tool life. Short retainer. |
CMM-4
INFO REQUEST
Basic system bit. Double angle carbide tip prolongs tool life. Requires a CMM-4 snap ring retainer (included with bit). |
C-21
INFO REQUEST
For most cutting applications. Especially good in soft to medium-hard material. Carbide tip (7.93mm diameter) provides fast penetration. |
 |
 |
 |
 |
C-31
INFO REQUEST
For trenching, sawing, augering, and tunnel boring in soft to hard rock and concrete. Carbide tip (9.5mm diameter) and steel nose design provide strength and long tool life. |
C-21HD
INFO REQUEST
Heavy duty design. For trenching, augering, and sawing in extremely hard rock and concrete. carbide tip (12.7mm diameter) provides long tooth life. |
C-31HD
INFO REQUEST
Heavy duty design for trenching, sawing, augering, and tunnel boring in extremely hard rock concrete. Carbide tip (12.7mm diameter) provides long tool life. |
|
 |
 |
 |
CMMB-2
INFO REQUEST
Accepts our CMM-4 and CMM-4-THD bits. easily welded with a 7018 or 8018 low-hydrogen rod. |
C-10
INFO REQUEST
Has a narrower face than C-10H style. Accepts all C-10 bits. Welds same as C-10H block. |
 |
 |
C-10H
INFO REQUEST
Heavy duty design (has machined step for non-rotating tools). Accepts all C-10 bits. Easily welded with a 7018 or 8018 low-hydrogen rod. |
C-30
INFO REQUEST
Accepts our C-31, C-31HD, C-32 and C-33 bits. welds same as C-30H block. |
 |
 |
C-30H
INFO REQUEST
Heavy duty design. Accepts all C-30 bits. Easily welded with a 7018 or 8018 low-hydrogen rod. |
|
 |
|
